OH! Wow! Have we got a "Nut Cracker" for you!
ON SALE NOW, $129.95 GET YOURS NOW!
Its very simple. Just pour your pecans, English walnuts (will not crack the hard shelled black-walnuts or hickory-nuts) into the included basket and start cracking. It does not take that much force on the handle and its a back and
forth motion, not a crank all the way around. That's it, that simple. The
cracked nuts fall from the bottom of unit into your bucket.
A Fine Product; A Fantastic Nut Cracker" GRAB YOUR's NOW!
Also, Grab you a , and/or rykeBurgerPress an we'll drop in shipping box!
No Additional Shipping Charge!!
Its real easy to adjust for different size nuts. The adjuster on the front of
the machine (easy to get to) will adjust from 1/4 inch nuts, way past the
larger English walnut sizes. Just loosen the 7/16th inch nut on the adjuster
(you will need a wrench to adjust machine, not included) and move it in for
smaller nuts (more cracking pressure) or move it out for larger nuts(less
cracking pressure). If you find you want more cracking on the nut, move the
adjuster in. If you find your getting to much cracking, then move the adjuster
out. No hard case, just crack a few and check your cracked nuts.
If you have a lot of real small nuts mixed with large one's, no problem. Just
set machine for large ones and most small one's will crack well also. If not,
while your picking out the meats, just throw the none cracked one's in a pile
and crack them on a new setting. Want take but a moment.
I've hand made each machine, checking each one before they are shipped. They
have been assembled and checked top to bottom for proper fit and years of
service. It will stand many decades of use. Made to last.
Solid aluminum, and steel. The main cracking base is 1/4 inch solid aluminum
and the handles are 1/4 inch painted steel. The steel handles have rubber hand
grips for easy non-slip grip. The basket will hold the nuts with out any
strain at all. Will hold the weight of more than 2 house bricks (weight)
without any problem (though your nuts want weigh a fraction of that).
The machine may be mounted on a 5 gallon bucket, or mounted on a bench. Also
maybe mounted to a board for clamping to a table with ease. Two 3/8th inch
holes, 6-1/2 inches apart on hole centers make for an easy mount. With the two
handles, the machine is really stable with out much mount at all. With the
bucket mount, you steady the machine with one hand and crack the nuts with the
other. Want fall over, nor is it hard to keep the machine steady. Heavy made
for stable use.
You'll receive the main cracker base with bearing and arbor, cracking plate
with bearing, two handles with rubber grips, a basket with bottom board.
Everything you need to start cracking nuts. Only two bolts will be needed to
mount to your bench or a small piece of plywood, or, less than 2 feet of
2-by-4 wood to make a bucket mount. Comes with intructions for adjusting as
well as a template for drilling holes to mount. Also comes with ideas and
plans for mounting on a bucket. Extra nice bucket mount plan for easy on off.
These are shipped USPS Priority Mail, flat rate large box. You will need to
assemble the unit. Very easy. Just a 7/16th inch wrench, a philips head screw
driver and a pair of pliers is all you'll needed to assemble unit. The basket
is shipped flat and will need to be bent to shape (pre-bent, yet you'll need
to unbend and straighten a bet) and wired together with the wire included. Not
hard, just will take you a few minutes to do, yet save more than half on
shipping. Once together, your ready to crack nuts.
What else can I say, this is the thing to have to get those nuts cracked.
You'll have a machine everyone will want and need if they have nuts to crack.
Thanks for looking, and "Happy Nut Cracking"!!
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: